ATTACH=0
Interrupt Status register
USBRST | This bit is set when the USB Module has decoded a valid USB reset |
ERROR | This bit is set when any of the error conditions within Error Interrupt Status (ERRSTAT) register occur |
SOFTOK | This bit is set when the USB Module receives a Start Of Frame (SOF) token |
TOKDNE | This bit is set when the current token being processed has completed |
SLEEP | This bit is set when the USB Module detects a constant idle on the USB bus for 3 ms |
RESUME | This bit is set when a K-state is observed on the DP/DM signals for 2 |
ATTACH | Attach Interrupt 0 (0): No Attach is detected since the last time the ATTACH bit was cleared. 1 (1): A peripheral is now present and must be configured (a stable non-SE0 state is detected for more than 2.5 us). |
STALL | Stall Interrupt |